CISILE 2023 has concluded, and ACCU continues to forge ahead!

2023-05-15

Word Size

From May 10th to 12th, 2023, the 20th China International Scientific Instrument and Laboratory Equipment Exhibition and the 4th China Laboratory Development Conference were held at the Beijing National Convention Center. The exhibition venue was simple and grand, with exhibitors scattered throughout and a constant stream of visitors.

At this exhibition, Beijing AccuFlow Technology Co., Ltd. (hereinafter referred to as "ACCU") showcased its mass flow controllers based on three different principles: thermal, differential pressure, and Coriolis, in the general laboratory equipment and analytical instrument exhibition area. They also promoted the company's newly developed controllable gas-liquid mixed evaporation system, attracting a large number of employees from government departments/research institutes, universities, and related companies to visit.

In addition, Chemical Instrument Network conducted a special interview with ACCU's booth. Our manager Zhao, using rich practical experience and theoretical knowledge, gave a detailed introduction to the company profile, product performance, and future research and development directions, further enhancing ACCU's brand awareness.

The 20th China International Scientific Instrument and Laboratory Equipment Exhibition and the 4th China Laboratory Development Conference have concluded! ACCU will continue to uphold the business philosophy of "Innovative Technology, Serving the World" and continue to shine in the instrumentation industry!


Related Products

ACU10FA


The ACU10FA analog-type mass flow controller features fast response and high precision. It offers a wide control range, with a flow rate capability spanning from 5 SCCM to 30 SLM, and can accurately measure and regulate flows as low as 1 SCCM—making it ideal for controlling even the tiniest gas flows.

ACU10FD


The ACU10FD digital mass flow controller consists of a mass flow sensor, laminar flow separator, flow controller regulating valve, and amplification control circuit. It features digital signal input and output, offering advantages such as short preheating time, minimal zero drift, and high reliability.

ACU10FDR


The ACU10FDR low-pressure-drop gas mass flow controller is equipped with a proprietary high-flow electromagnetic valve, making it ideal for controlling mass flow even when system pressure is nearly unavailable. Its minimal pressure differential ensures the least possible impact on the system, enabling precise flow control under near-atmospheric conditions while significantly reducing system response time. We can customize the valve and PID control features based on your specific application parameters, guaranteeing fast, stable performance with minimized pressure loss.

ACU10FC


The ACU10FC differential-pressure mass flow controller employs a differential-pressure-based mass measurement principle that features no thermal drift and zero response lag. It can simultaneously display and output parameters such as instantaneous flow rate, totalized flow, pressure, and temperature. When control functionality is required, an electromagnetic proportional control valve can be added, along with built-in PID regulation capabilities. Unlike thermal mass flow meters, the ACU10FC eliminates any additional "specific heat capacity" error when using gas conversion factors. As a result, even if the gas being measured differs from the calibration gas used at the factory, the measurement accuracy remains unaffected.

ACU10P


The ACU10P series pressure controllers/pressure gauges feature a straight-through design, with measurement ranges from 100 kPa to 10 MPa (both absolute and gauge pressures are supported). Additionally, differential pressure transmitters are also available.