Product Center
ACU10FB
ACU10FB
Category:
Product attachment:
Product Description
- Product Description
-
I. Product Overview
The ACU10FB solar-powered flow meter, based on the ACU10FT, adds a built-in lithium battery (automatically charged under DC power, automatically switching to the lithium battery for continuous operation up to one month after power failure), with data storage and report output functions, and optional backup solar panels and wireless communication.
The ACU10FB solar-powered flow meter uses multi-parameter measurement technology. One instrument can replace four instruments: differential pressure, pressure, flow, and totalizer, saving customers procurement and installation costs. The integrated flow meter uses full-parameter dynamic compensation technology to improve the instrument's accuracy and range ratio; full-scale static pressure compensation technology improves the accuracy of the flow device operation; it can be calibrated integrally with the flow element, and the calibration accuracy is better than that of the separate type; the functions are specialized and integrated;
Different flow elements can be selected according to the needs (see the selection table - flow element type), and the corresponding technical parameters will also be slightly different. Refer to the integrated multi-variable orifice plate flow meter [P], integrated multi-variable V-cone mass flow meter [M], and integrated multi-variable V-bar mass flow meter [B]. Please consult the manufacturer if anything is unclear.
II. Industry Applications
The ACU10FB solar-powered flow meter is used for the measurement of gas, liquid, and steam in the petroleum, chemical, power, pharmaceutical, food, papermaking, water treatment, metallurgy, cement, and glass industries.
III. Technical Parameters (Related to the type of flow element)
1. [P] Orifice plate, nozzle, Venturi, etc., standard flow elements that do not require in-situ calibration
Accuracy Grade Differential pressure: 0.075% Pressure: 0.25% Temperature: 0.5℃ Flow accuracy: 0.5～2.5% Applicable Medium Suitable for various gases, low-viscosity liquids, and steam measurement Pressure Range Differential pressure: 0～21MPa Ambient Temperature With LCD: -20～70℃ Without LCD: -40～85℃ Pipe Diameter DN50～DN300 Range Ratio ≥8:1 Power Supply 24VDC Straight Pipe Section Requirements 5D upstream, 2D downstream (consult the factory if the straight pipe section is insufficient) Material Compatibility Stainless steel, Hastelloy, tantalum optional Enclosure Protection IP67 Electromagnetic Shielding IEC61000-4-2-5 Installation Method Integrated and separate types optional Explosion-proof Type Intrinsic safety and explosion-proof optional Calibration Method Water or gas calibration 2. [M] V-type, wedge-type, etc., flow elements that require in-situ calibration
Accuracy Grade Differential pressure: 0.075% Pressure: 0.25% Temperature: 0.5℃ Flow accuracy: 0.3~0.5% Applicable Medium Suitable for liquids, steam, and gases Pressure Range 0.65~21MPa (contact us for pressures above this range) Ambient Temperature With LCD: -20～70℃ Without LCD: -40～85℃ Operating Temperature -60~550℃ Pipe Diameter DN50～DN500 Range Ratio ≥15:1 Power Supply 24VDC Straight Pipe Section Requirements 3D upstream, 1D downstream (consult the factory if the straight pipe section is insufficient) Material Compatibility 316L stainless steel, Hastelloy, tantalum optional Enclosure Protection IP67 Electromagnetic Shielding IEC61000-4-2-5 Installation Method Integrated and separate types optional Explosion-proof Type Intrinsic safety and explosion-proof optional Calibration Method Water or gas calibration 3. [B] Various insertion-type uniform tubes and Pitot tubes
Accuracy Grade Differential pressure: 0.075% Pressure: 0.25% Temperature: 0.5℃ Flow accuracy: 0.5~2% Applicable Medium Suitable for various gases, steam, and low-viscosity liquids Pressure Range 0~21MPA Ambient Temperature With LCD: -20～70℃ Without LCD: -40～85℃ Pipe Diameter DN15～DN12000 (circular pipe), side length 200~4000 (square pipe) Range Ratio ≥10:1 Power Supply 24VDC Straight Pipe Section Requirements 10D upstream, 3D downstream (consult the factory if the straight pipe section is insufficient) Material Compatibility Stainless steel, Hastelloy, tantalum optional Enclosure Protection IP67 Electromagnetic Shielding IEC61000-4-2-5 Installation Method Integrated and separate types optional Explosion-proof Type Intrinsic safety and explosion-proof optional Calibration Method Water or gas calibration
Keyword:
Semiconductor and Microelectronics Manufacturing
Get a quote
Note: Please leave your mobile phone number or email address, and our professionals will contact you as soon as possible!
Contact Information
Address: Room 1522/23, Building B, Ruichuang International Center, No. 8 Wangjingdong Road, Chaoyang District, Beijing (R&D Department)
Leave a message
If you are interested in our products, please leave your email address, and we will contact you as soon as possible, thank you!